Ford Model: Posted February 19, 2021. From the Haynes manual Stage 1: 70Nm. Stage 2: Angle-tighten a further 70 o. Though if the bolt has become loose or you need to remove to change the pulley then it's recommended to get a new bolt. 1. Finish it off with a remap) if funds are good and the missus is happy then get a rolling road remap but if funds are tight then someone will be willing to map it for about £100-£200. I only had a cheap map but christ did it wake the motor up. Mondeo mk3 2004 2.0tdci (scrapped).. fiesta mk7 2010 1.4 auto (sold).. If it is smoking I suggest that its probably the injectors leaking. This does not automatically indicate a problem. Many people on here have this issue and have just learnt to live with it. 1992 Mercedes 190E 2.0 Petrol Auto. 2010 Mazda 3 MPS 2.3 Turbo Petrol 260PS. 2006 Mondeo Zetec 2.0 TDCi 130 - Remapped to 165bhp. Save.
I ran some Revive turbo cleaner through the intake manifold and it smoothed out a lot of the hesitation but its still drops in to limp mode. Im pretty sure I can cause it to limp. 6th gear, 65-70MPH, approx. 1200-1500 RPM. Maintain that for 10 min or so and it may drop in to limp.
There is nothing useful in the 'technical description', but it looks to say something about 'Organic Acid Technology' in the small print, on the front. if you car is still on the same type of Antifreeze that it left the factory on, it will be the organic acid stuff (should be pink - although, you can probably get pink stuff that is wrong too Good afternoon Hope all good! I purchased a Mondeo on the 12th September 2023 and loved it for 3 1/2 weeks, lovely condition and drove beautifully, it had a slightly lazy start first thing so I replaced the battery and then the starter motor as it persisted. Yesterday though I started noticing sp The following appeared when at approx 50-55mph, there is a reduction in power (almost feels like cutting out) however engine runs. I see the skid Electronic stability light. When I accelerated again power reduced and oil light came on briefly then off. P1169. Power train. HO2S High input. HO2S bank 1 sensor 1 circuit fixed (bank 1 sensor 1) Car nzbK.
  • i1z990uexp.pages.dev/105
  • i1z990uexp.pages.dev/115
  • i1z990uexp.pages.dev/280
  • i1z990uexp.pages.dev/284
  • i1z990uexp.pages.dev/147
  • i1z990uexp.pages.dev/55
  • i1z990uexp.pages.dev/234
  • i1z990uexp.pages.dev/241
  • i1z990uexp.pages.dev/333

    • ford mondeo 2.0 tdci forum